the copyright and authority for the interpretation of the products are reserved by mornsun specifications subject to change without notice. fc-lx1d & FC-LX1D2 2013.05.27-a/1 page 1 of 8 fc-lx1d & FC-LX1D2 emc filter this model applies to analog circuit which is noise-sensitive. put fc-lx1d on to the input of ac/dc module can ensure the module meet surge level of iec/en61000-4-5 2kv (2 internal resistance)/ 4kv (12 internal resistance). put FC-LX1D2 on to the input of ac/dc module can ensure the module meet surge level of iec/en61000-4-5 4kv (2 internal resistance)/ 6kv (12 internal resistance) and emi requirement of cispr22 /en 55022 class b. emc filter used with the mornsun ac/dc module, ac/dc module s max. voltage, ac/dc module s max. input current must less than emc filter s nominal current. rohs features 1. compact size 2. design to suppress the ac power surge to achieve primary protection 3. ensure the power supply module to meet the requirement of cispr22/ en55022 class b 4. cost-effective 5. low temperature rise 6. mounting: pcb mounting, chassis mounting with screw terminals, din-rail mounting part number system FC-LX1D2 product series nominal current emc sort supportingproduct series special characteristic package style selection guide model input voltage range (vac) nominal current (a)(max) fc-lx1d 85~264 1.5 FC-LX1D2 85~264 1.5 note: series with suffix a2s are chassis mounting, with suffix a4s are din-rail mounting, for example fc-lx1da4s. common specifications item test conditions min. typ. max. unit operating temperature -40 -- 85 storage temperature -55 -- 125 220vac @0.5a -- -- 5 220vac @1.0a -- -- 20 case temperature rise 220vac @1.5a -- -- 30 c test voltage (l/pe,n/pe) tested for 1 minute and leakage current:1 ma -- 2000 -- vac case material plastic ul94-v0 pcb mounting 33.7x22.2x18.00 a2s chassis mounting with screw terminals 76.0x31.5x26.80 fc-lx1d a4s din-rail mounting 76.0x31.5x31.40 pcb mounting 53.8x28.8x19.00 a2s chassis mounting with screw terminals 76.0x31.5x27.80 package FC-LX1D2 a4s din-rail mounting 76.0x31.5x32.40 mm pcb mounting 20 a2s chassis mounting with screw terminals 40 fc-lx1d a4s din-rail mounting 60 weight FC-LX1D2 pcb mounting 50 g
the copyright and authority for the interpretation of the products are reserved by mornsun specifications subject to change without notice. fc-lx1d & FC-LX1D2 2013.05.27-a/1 page 2 of 8 a2s chassis mounting with screw terminals 70 a4s din-rail mounting 90 note: all specifications measured at ta=25 c, humidity<75%, nominal input voltage and rated output load unless otherwise specified. frequency attenuation specifications item test conditions min. typ. max. unit fc-lx1d -- 20 -- the attenuation coefficient of frequency 150khz 1ghz FC-LX1D2 -- 30 -- db devise standard put fc-lx1d on to the input of ac/dc module can ensure the module meet surge level of iec/en61000-4-5 2kv (2 internal resistance)/ 4kv (12 internal resistance). put FC-LX1D2 on to the input of ac/dc module can ensure the module meet surge level of iec/en61000-4-5 4kv (2 internal resistance)/ 6kv (12 internal resistance) and emi requirement of cispr22 /en 55022 class b. inside schematic in(n) in(l) out(n) out(l) (figure 1)fc-lx1d in(n) in(l) out(n) out( l) (figure 2)FC-LX1D2 apply circuit ac(l) l n -vo fuse in(l) in(n) out(l) out(n) FC-LX1D2 output ac-dc converter +vo ac(n) fuse: due to the difference of the power module input current, the fuse of the recommended values, please refer to the technical manual for the power module. supporting the product model model emi (without external circuit) emi (with emc filter) surge (without external circuit) surge (with fc-lx1d) surge (with FC-LX1D2) ld(01-03)-10bxx series cispr22/en55022 class a cispr22/en55022 class b -- iec/en61000-4-5 2kv/ 4kv perf. criteria b -- ld(05-10)-20bxx series cispr22/en55022clas s a cispr22/en55022 class b iec/en 61000-4-5 1kv perf. criteria b iec/en61000-4-5 2kv/ 4kv perf. criteria b iec/en61000-4-5 4kv/ 6kv perf. criteria b ld10-20bxxmu series cispr22/en55022clas s a cispr22/en55022 class b iec/en 61000-4-5 1kv perf. criteria b ec/en61000-4-5 2kv/ 4kv perf. criteria b iec/en61000-4-5 4kv/ 6kv perf. criteria b ld12-20bxx series cispr22/en55022 class b cispr22/en55022 class b iec/en 61000-4-5 2kv perf. criteria b -- iec/en61000-4-5 4kv/ 6kv perf. criteria b ld20-10bxx series cispr22/en55022 class b cispr22/en55022 class b iec/en 61000-4-5 2kv/ 4kv perf. criteria b -- iec/en61000-4-5 4kv/ 6kv perf. criteria b lh(05-40)-10xxx series cispr22/en55022 class b cispr22/en55022 class b iec/en 61000-4-5 1kv/ 2kv perf. criteria b iec/en61000-4-5 2kv/ 4kv perf. criteria b iec/en61000-4-5 4kv/ 6kv perf. criteria b lbxx-10xxx series cispr22/en55022 class a cispr22/en55022 class b iec/en61000-4-5 1kv/ 2kv perf. criteria b iec/en61000-4-5 2kv/ 4kv perf. criteria b iec/en61000-4-5 4kv/ 6kv perf. criteria b
the copyright and authority for the interpretation of the products are reserved by mornsun specifications subject to change without notice. fc-lx1d & FC-LX1D2 2013.05.27-a/1 page 3 of 8 li 24 series cispr22/en55022 class b cispr22/en55022 class b iec/en 61000-4-5 1kv/ 2kv perf. criteria b iec/en61000-4-5 2kv/ 4kv perf. criteria b ec/en61000-4-5 4kv/ 6kv perf. criteria b ls03 series -- cispr22/en55022 class b -- ec/en61000-4-5 2kv/ 4kv perf. criteria b -- dedicated power converter for power system lh(e) series cispr22/en55022 class b cispr22/en55022 class b iec/en 61000-4-5 2kv/ 4kv perf. criteria b -- ec/en61000-4-5 4kv/ 6kv perf. criteria b dedicated power converter for power system lh(er2) series cispr22/en55022 class a cispr22/en55022 class b iec/en 61000-4-5 2kv/ 4kv perf. criteria b -- ec/en61000-4-5 4kv/ 6kv perf. criteria b lm30-00j0512-03 e cispr22/en55022 class b cispr22/en55022 class b iec/en 61000-4-5 2kv/ 4kv perf. criteria b -- ec/en61000-4-5 4kv/ 6kv perf. criteria b lo10-00b24e cispr22/en55022 class b cispr22/en55022 class b iec/en 61000-4-5 2kv/4kv perf. criteria b -- ec/en61000-4-5 4kv/ 6kv perf. criteria b fc-lx1d emc specifications surge test result input voltage waveform ( differential mode 2.08 kv) output voltage waveform ( differential mode 0.91 kv) input voltage waveform ( common mode 4.00kv) output voltage waveform( common mode 0.75 kv) note: above result was tested on fc-lx1d open. emi test waveform power supply front-end without fc-lx1d l1 (left), l2(right)line ce meet cispr22/en 55022 class a
the copyright and authority for the interpretation of the products are reserved by mornsun specifications subject to change without notice. fc-lx1d & FC-LX1D2 2013.05.27-a/1 page 4 of 8 power supply front-end with fc-lx1d l1(left), l2(right) line ce meet cispr22/en 55022 class b power supply front-end without fc-lx1d horizontal (left), vertical(right) re meet cispr22/en 55022 class a power supply front-end with fc-lx1d horizontal (left), vertical(right) re meet cispr22/en 55022 class b note: above result was tested on ld03-10b05. FC-LX1D2 emc specifications surge test result input voltage waveform ( differential mode 4.00kv) output voltage waveform ( differential mode 0.90kv) input voltage waveform ( common mode 6.05kv) output voltage waveform( common mode 0.65kv) note: above result was tested on FC-LX1D2 open.
the copyright and authority for the interpretation of the products are reserved by mornsun specifications subject to change without notice. fc-lx1d & FC-LX1D2 2013.05.27-a/1 page 5 of 8 emi test waveform power supply front-end with FC-LX1D2 l1(left), l2(right) line ce meet cispr22/en 55022 class b power supply front-end with FC-LX1D2 horizontal (left), vertical(right) re meet cispr22/en 55022 class b note: above result was tested on ld03-10b05. fc-lx1d pcb mounting with solder pins
the copyright and authority for the interpretation of the products are reserved by mornsun specifications subject to change without notice. fc-lx1d & FC-LX1D2 2013.05.27-a/1 page 6 of 8 fc-lx1da2s chassis mounting with screw terminals fc-lx1da4s din-rail mounting
the copyright and authority for the interpretation of the products are reserved by mornsun specifications subject to change without notice. fc-lx1d & FC-LX1D2 2013.05.27-a/1 page 7 of 8 FC-LX1D2 pcb mounting with solder pins FC-LX1D2a2s chassis mounting with screw terminals
the copyright and authority for the interpretation of the products are reserved by mornsun specifications subject to change without notice. fc-lx1d & FC-LX1D2 2013.05.27-a/1 page 8 of 8 FC-LX1D2a4s din-rail mounting mornsun science & technology co.,ltd. address: no. 5, kehui st. 1, kehui development center, science ave., guangzhou science city, luogang district, guangzhou,p.r.china. tel: 86-20-38601850 fax:86-20-38601272 e-mail: info@mornsun.cn http://www.mornsun-power.com
|
